2003 Larson Bow Rider – West Sayville, NY

This Larson located in West Sayville was in pretty good condition when we found it. The only area that needed serious attention was the white colored railing above the rub rail. We started by washing the entire boat down and scrubbing all areas to remove dirt and surface contaminants. After rinsing the boat down with water to wash off the marine concentrate, we dried all areas of the boat.

We compounded the areas above the rub rail which removed black streaks, stains, and gel coat imperfections. We used a Porter Cable 7424 XP using a dense foam pad to break down the compound. We applied using a lower speed and broke down the product at speed 6. The results left the fiberglass feeling smooth, clean, and free of visible imperfections.

Next, we applied a coat of high quality marine wax to the hull, topside railing, and cock pit areas. This Larson really shined up after the wax was removed. All leather seats were scrubbed and brightened up after they were dried. We polished the glass, chrome trim, and treated plastic and vinyl trim. We snapped a few pictures before we left as this boat is now shining and protected.

Popularity: 83% [?]

Tweet This Post Digg This Post Facebook MySpace Ping This Post